BXBFY - MOLYBDENUM PLASMA EMISSION STANDARD - 10,000 UG/ML
- MSDS: BXBFY
- Manufacturer: VHG LABS INC
- Product Name: MOLYBDENUM PLASMA EMISSION STANDARD - 10,000 UG/ML
- National Stock Number: 6810-00N058164
Product Identification
Product ID:MOLYBDENUM PLASMA EMISSION STANDARD - 10,000 UG/ML
MSDS Date:01/21/1993
FSC:6810
NIIN:00N058164
MSDS Number: BXBFY
Responsible Party
MANCHESTER, NH 03109
US
Emergency Phone: 603-622-7660
Info Phone: 603-622-7660
Cage: 0RP29
Contractor
Telephone: 603-622-7660/ -5180 FAX
Cage: 0RP29
Ingredients
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 1%
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM
HYDROGEN FLUORIDE; (HYDROFLUORIC ACID) (SARA 302/313)
CAS: 7664-39-3
RTECS: MW7875000
Fraction By Weight: <1%
OSHA PEL 3 PPM (F)
ACGIH TLV: 3 PPM (F), C
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
NITRIC ACID (SARA 302/313) (CERCLA)
CAS: 7697-37-2
RTECS: QU5775000
Fraction By Weight: 5%
OSHA PEL 2 PPM
ACGIH TLV: 2 PPM;4 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: BALANCE
OSHA PEL N/K
ACGIH TLV: N/K
SHOULD BE SOAKED W/ONE OF ABOVE SOLNS & USED AS
RTECS: 9999999ZZ
CHANGED EVERY 2 MINS. 5) B)ALTERNATIVE TREATMENT TO
RTECS: 9999999ZZ
SOLN SUBCUTANEOUSLY BENEATH, AROUND & IN BURNED AREA.
RTECS: 9999999ZZ
DO NOT DISTORT APPEAR OF SKIN. IF PAIN IS NOT
RTECS: 9999999ZZ
ATTN AS SOON AS POSS FOR ALL BURNS REGARDLESS OF HOW
RTECS: 9999999ZZ
1)IRRIGATE FOR AT LST 15 MINS W/COPIOUS QTYS OF
RTECS: 9999999ZZ
DURING IRRIGATION. 2)GET COMPETENT MED ATTN IMMED,
RTECS: 9999999ZZ
ONE/TWO DROPS OF 05% PONTOCAINE HYDROCHLORIDE SOLN
RTECS: 9999999ZZ
SOLNS DESCRIBED FOR TREATMENT. USE NO OILS/GREASES
RTECS: 9999999ZZ
& FULL LENGTH FACESHIELD .
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:SEVERE IRRITATION OR BURNS
OF RESPIRATORY SYSTEM, HEADACHE, NAUSEA, VOMITING, DIZZINESS,
PULMONARY EDEMA, LUNG INFLAMMATION. SKIN/EYE CONTACT:SEVERE BURNS
(MAY BE DELAYED). SKIN ABSORPTION :ATTACKS UNDERLYING TISSUES &
BONE. INGEST:BURNS TO MOUTH, THROAT & STOMACH, KIDNEY DISFUNCTION.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CHRONIC:HYPOCALCEMIA, BONE & JOINT
DAMAGE. TARGET ORGANS:EYES, SKIN, RESPIRATORY SYSTEM, LUNGS.
Medical Cond Aggravated by Exposure:DAMAGED SKIN.
First Aid
First Aid:INGEST:CALL MD. IF SWALLOWED, DO NOT INDUCE VOMIT. IF
CONSCIOUS, GIVE WATER, MILK/MILK OF MAGNESIA. INHAL:REMOVE TO FRESH
AIR. IF NOT BRTHG, GIVE ARTF RESP. IF BRTHG IS DFCLT, GIVE OXYGEN.
SKIN:FOR AC ID BURNS TO BODY:1)REMOVE VICTIM FROM CONTAM AREA &
IMMED PLACE HIM UNDER SFTY SHOWER/WASH HIM W/WATER HOSE, WHICHEVER
IS AVAIL. 2)REMOVE ALL CONTAM CLTHG. 3)KEEP WASHING W/LG AMTS OF
WATER (SUPDAT)
Fire Fighting
Flash Point Method:CC
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:REACTS W/MOST METALS TO PRODUCE HYDROGEN
GAS, WHICH CAN FORM AN EXPLOSIVE MIXTURE W/AIR.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
CLOTHING. STOP LEAK IF YOU CAN DO SO W/OUT RISK. VENTILATE AREA.
NEUTRALIZE SPILL W/SODA ASH/LIME. WITH CLEAN SHOVEL, CAREFULLY
PLACE MATL INTO CLEAN, DRY CNTNR & COVER; REMOVE FROM AREA. FLUSH
SPILLW/WATER.
Neutralizing Agent:SODA ASH OR LIME.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN CORROSION-PROOF AREA. ISOLATE FROM INCOMPATIBLE MATERIALS.
Other Precautions:CORROSIVE LIQUIDS, POISONOUS. READ ALL PRECAUTIONARY
INFORMATION.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:VENT HOOD.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(ING 14)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . LAB COAT & APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:FOR MIN OF 15-20 MINS. 4)HAVE SOMEONE MAKE ARRANGEMENTS
FOR MED ATTN WHILE YOU CONTINUE FLUSHING AFFECTED AREA W/WATER. 5)
A)IF AVAIL, AFTER THORO WASHING, BURNED AREA SHOULD BE IMMERSE D IN
SOLN OF 0.2% ICED AQ HYAMINE 1622/0.13% ICED AQ ZEPHIRAN CHLORIDE.
IF IMMERSION IS NOT PRACTICAL, TOWELS (ING 5)
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Spec Gravity:1 (H*2O=1)
Solubility in Water:COMPLETE (100%)
Appearance and Odor:CLEAR, COLORLESS LIQUID; ODORLESS.
Percent Volatiles by Volume:99
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES, ALKALIES, MOST COMMON METALS, AMINES, CARBONATES,
SULFURIC ACID, CHLOROSULFONIC ACID, METAL OXIDES.
Stability Condition to Avoid:HEAT.
Hazardous Decomposition Products:OXIDES OF NITROGEN, HYDROGEN FLUORIDE.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL APPLICABLE FEDERAL, STATE &
LOCAL ENVIRONMENTAL REGULATIONS. EPA HAZARDOUS WASTE NUMBER: D002
(CORROSIVE WASTE).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.